Thermoworks P795 PRINTING DATALOGGER THERMOMETER Uživatelský manuál stáhnout pdf (Strana 8)

E.g. of the instrument’s LCD by activated logging mode:

On the bottom you can see the percentage of the occupied

memory(0..99%). If a calibration option is activated the

display is alternating between displaying memory status and

calibration information.

1.5 Recalling the memory data (HOLD MAX MIN AVE)

After pushing first time the key [HOLD MAX MIN AVE] the actual values will be held

on the display. Pushing again the key [HOLD MAX MIN AVE], the saved maximum-,

minimum and average values will be displayed.

Note: During the recall of the memory data the extremes (MAX MIN) and the

average value (AVE) will not be calculated or carried on.

Clearing the memory (MAX MIN AVE)

Press [CLEAR] key once to erase the stored maximum, minimum and average from

memory. On the display appears Clr. – After erasing the memory the instrument

automatically reverts back to measuring mode indicating the actual measured value

again.

1.6 Measuring rate (Normal-Mode/FAST-mode/Filter-Mode)

The instrument has three different response times to select:

Normal-Mode: high resolution (0,001 from -199,999 to +199,999)

Fast-Mode: reduced resolution (0,01 from -199,99 to +199,99)

Filter-Mode: high resolution (0,001 from -199,999 to +199,999)

Press [FAST/] key to change the measuring rate.

By using the Filter-Mode the instrument is performing a moving average to stabilize

the dispayed measurements.

After turning on the instrument it is in the Normal-Mode. After pressing once the

[FAST/] key the instrument switches to the Fast-Mode. Pressing the same key

once again the instrument switches to the Filter-Mode.

E.g. Display with activated Filter-Mode:

The arrow on the top indicates that the instrument is working

in the Filter-Mode.

Note: After switching off the instrument, this function is automatically deactivated.

1.7 AUTO-OFF-function

EAoF = Enable Auto-off

dAoF = Disable Auto-off

Press [ESC/AUTO-OFF] key once. On the display appears EAoF. Now the

instrument switches off automatically after app. 30 minutes. Press [ESC/AUTO-OFF]

key again. On the display appears dAoF. Now the Auto-Off-function is deactivated.

Note: After switching off the instrument, this function is automatically deactivated.

1.8 TARE-Function(ZERO-Mode F1)

1 2 3 4 5 6 7 8 9

Žádné komentáře

Thermoworks P795 PRINTING DATALOGGER THERMOMETER Uživatelský manuál Strana 8